Looking for a reliable ultra high pressure concrete pump for demanding industrial applications? The Blastcrete MX-10 Mixer/Pump is a specialized mixing and pumping system designed for dense refractory shotcrete and pump-cast installations. Combining a high-torque hydraulic pan mixer with a 3-inch ultra-high-pressure swing tube piston pump, the MX-10 provides an integrated solution for mixing and delivering refractory materials in challenging industrial environments.
Since 1996, the MX-10 has been an established choice for monolithic refractory installations. With a specified pumping pressure of 2,200 PSI and a stated material delivery capacity of up to 10 tons per hour, this equipment is designed to support demanding refractory placement operations.
The MX-10 is also commonly used to pump suitable refractory materials over vertical distances exceeding 300 feet, depending on material properties, pipeline configuration, and operating conditions. Its swing-out receiving hopper provides convenient access to the lower hopper and swing tube section for cleaning and maintenance.
Request a Quote or Download the Brochure to learn more about the Blastcrete MX-10 and its high-pressure pumping capabilities.
What Is the Blastcrete MX-10 Ultra High Pressure Concrete Pump?
The Blastcrete MX-10 is an integrated mixer and pump designed for dense refractory shotcrete and pump-cast applications. It combines material preparation and high-pressure pumping in one machine, helping contractors manage refractory installation projects that require consistent mixing and reliable material delivery.
The system features a 3-inch × 24-inch ultra-high-pressure swing tube piston pump and a 2,200-pound-capacity high-torque hydraulic pan mixer. Together, these components are designed to handle suitable refractory materials for demanding industrial applications.
Although commonly described as an ultra high pressure concrete pump, the MX-10 is specifically designed for dense refractory shotcrete and pump-cast work. Contractors should verify material compatibility before using it for other concrete pumping applications.
For industrial contractors seeking dependable high-pressure pumping equipment, the MX-10 offers a combination of mixing capacity, pumping performance, and maintenance accessibility.
Key Features of the MX-10 High-Pressure Pump
1. 2,200 PSI High-Pressure Pumping System
The MX-10 features a 3-inch × 24-inch ultra-high-pressure swing tube piston pump with a specified pumping pressure of 2,200 PSI.
This high-pressure configuration is designed for demanding refractory pump-cast and shotcrete applications where suitable material must be delivered reliably through a pumping line.
Its performance makes it worth considering for industrial installations involving dense refractory materials and extended pumping distances.
2. High-Torque Hydraulic Pan Mixer
The MX-10 includes a hydraulic pan mixer with a capacity of 2,200 pounds.
The mixer has a stated mixing time of approximately 1.5 to 2 minutes, supporting the preparation of suitable refractory materials for pumping and placement.
Consistent mixing is important for achieving the material characteristics required by the installation process. Mixing procedures should follow the refractory manufacturer's recommendations.
3. Material Output of Up to 10 Tons per Hour
The MX-10 is designed to deliver up to 10 tons of refractory material per hour under suitable operating conditions.
Its technical specifications also list a volumetric output range of 0–12 cubic yards per hour. Actual production depends on material density, mix formulation, pipeline setup, and operating conditions.
This capacity makes the equipment suitable for evaluation on industrial refractory projects that require substantial material delivery.
4. Vertical Pumping Beyond 300 Feet
The MX-10 is commonly used to pump compatible refractory materials over vertical distances exceeding 300 feet.
This capability supports industrial installation work where refractory material must reach elevated or difficult-to-access locations.
Actual pumping distance depends on the material formulation, pipeline diameter and layout, elevation, and site conditions.
5. Swing-Out Receiving Hopper
The MX-10 features a swing-out receiving hopper with a stated capacity of 2,500 pounds and a hydraulic agitator.
The swing-out design allows easier access to the lower hopper and swing tube section for cleaning and maintenance. Forklift tubing mounted to the lower hopper also facilitates flat-pack removal.
These features support equipment servicing and handling when
Ultra High Pressure Concrete Pump Blastcrete MX-10 Mixer/Pump
