Looking for reliable monolithic refractory installation equipment for demanding industrial projects? The Blastcrete MX-10 Mixer/Pump is designed for dense refractory shotcrete and pump-cast applications, combining a high-torque hydraulic pan mixer with a 3-inch ultra-high-pressure swing tube piston pump.
Since 1996, the MX-10 has been an established choice for monolithic refractory installations. Its integrated mixing and pumping system helps contractors prepare and deliver compatible refractory materials for industrial applications that require dependable material handling and placement.
With a specified piston face pressure of 2,200 PSI and a stated material delivery capacity of up to 10 tons per hour, the MX-10 is built for demanding refractory installation work. It is also commonly used to pump suitable refractory materials over vertical distances exceeding 300 feet, depending on material properties, pipeline configuration, and operating conditions.
Request a Quote or Download the Brochure to explore the features and capabilities of the Blastcrete MX-10 Mixer/Pump.
What Is Monolithic Refractory Installation Equipment?
Monolithic refractory installation equipment is used to mix, transport, and place refractory materials that form a continuous lining rather than being installed as individual prefabricated bricks or shapes.
These materials are commonly used to protect industrial equipment exposed to high temperatures, thermal cycling, abrasion, and other demanding operating conditions.
The Blastcrete MX-10 combines material mixing and high-pressure pumping in one machine. Its hydraulic pan mixer prepares compatible refractory mixes, while its swing tube piston pump delivers the material to the application area.
This integrated arrangement makes the MX-10 a specialized option for contractors working on refractory shotcrete, pump-cast installations, and other suitable monolithic refractory projects.
Key Features of the Blastcrete MX-10 Mixer/Pump
1. Ultra-High-Pressure Swing Tube Piston Pump
The MX-10 features a 3-inch × 24-inch ultra-high-pressure swing tube piston pump with a specified piston face pressure of 2,200 PSI.
This pumping system is designed for demanding refractory shotcrete and pump-cast applications involving compatible dense materials. Its high-pressure configuration supports material delivery through a suitably designed pipeline.
2. High-Torque Hydraulic Pan Mixer
The machine includes a hydraulic pan mixer with a capacity of 2,200 pounds and a stated mixing time of approximately 1.5 to 2 minutes.
Effective mixing is essential for preparing refractory materials for pumping and placement. Operators should follow the material manufacturer's recommended mixing procedures and water requirements to achieve the intended consistency.
3. High Material Output Capacity
The MX-10 is designed to deliver up to 10 tons of material per hour. Its specifications also list a volumetric output range of 0–12 cubic yards per hour.
Actual production depends on material density, mix formulation, pipeline configuration, and job-site conditions. Contractors should assess their required production rate when choosing equipment for a particular installation.
4. Extended Vertical Pumping Capability
The MX-10 is commonly used to pump suitable refractory materials over vertical distances exceeding 300 feet.
This capability can support refractory installation projects in elevated or difficult-to-access areas of industrial facilities. Actual pumping performance depends on the material being used, pipeline layout, elevation, and operating conditions.
5. Swing-Out Receiving Hopper
The MX-10 features a 2,500-pound-capacity swing-out receiving hopper equipped with a hydraulic agitator.
The swing-out design provides convenient access to the lower hopper and swing tube section for cleaning and maintenance. Forklift tubing mounted to the lower hopper also facilitates flat-pack removal and handling.
6. Water Measurement and Material Preparation
The MX-10 includes a Fill-Rite water meter and a 20-gauge dousing bucket for fast water introduction.
These components support water measurement and material preparation. Proper water control is important because the mix design affects material consistency, pumpability, and installation performance.
7. Solid-State Electronic Controls
The machine features solid-state electronics and solid-state valve control. CE certification is also listed among its features.
Confirm the applicable certification documentation and electrical requirements with the supplier before purchasing the machine for a particular location.
Applications of Monolithic Refractory Installation Equipment
Industrial Furnace Linings
Industrial furnaces operate under high-temperature conditions and require suitable refractory linings to protect internal surfaces. The MX-10 can support the placement of compatible monolithic refractory materials for these applications.
Cement Kilns and Industrial Kilns
Cement kilns and other industrial kilns depend on refractory linings to withstand heat and demanding process conditions. The MX-10's mixing and pumping configuration is designed to support suitable refractory installation and repair work.
Boiler and Thermal Processing Systems
Boilers and thermal processing facilities may require refractory installation, repair, or replacement. The MX-10 offers
Monolithic Refractory Installation Equipment Blastcrete MX-10 Mixer/Pump
